View LTL2R3SEKS2-132A_4966793.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

LITE-ON TECHNOLOGY CORPORATION
Property of LITE-ON Only
Features
* High luminous intensity output. * Low power consumption. * High efficiency. * Versatile mounting on P.C. board or panel. * I.C. Compatible/low current requirements. * Popular T-13/4 diameter.
Package Dimensions
Part No.
LTL2R3SEKS2-132A
Lens
Water Clear
Source Color
AlInGaP Super Red
Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25mm(.010") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice.
Part No. : LTL2R3SEKS2-132A BNS-OD-C131/A4
Page :
1
of
6
LITE-ON TECHNOLOGY CORPORATION
Property of LITE-ON Only
Absolute Maximum Ratings at TA=25
Parameter Power Dissipation Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) Continuous Forward Current Derating Linear From 50 Reverse Voltage Operating Temperature Range Storage Temperature Range Lead Soldering Temperature [1.6mm(.063") From Body] 100 50 0.6 5 -40 to + 100 -55 to + 100 260 for 5 Seconds mA mA mA/ V Maximum Rating 130 Unit mW
Part No. : LTL2R3SEKS2-132A BNS-OD-C131/A4
Page :
2
of
6
LITE-ON TECHNOLOGY CORPORATION
Property of LITE-ON Only
Electrical / Optical Characteristics at TA=25
Parameter
Symbol
Min.
Typ.
Max.
Unit
Test Condition IF = 20mA Note 1,5 Note 2 (Fig.5) Measurement @Peak (Fig.1) Note 4
Luminous Intensity
IV 21/2 P d
1900
3700
mcd
Viewing Angle
30
deg
Peak Emission Wavelength
639
nm
Dominant Wavelength
630
nm
Spectral Line Half-Width
17
nm
Forward Voltage
VF
2.2
2.6
V A
IF = 20mA
Reverse Current
IR
100
VR = 5V
Capacitance
C
40
pF
VF = 0 , f = 1MHz
NOTE: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve. 2. 1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 3. Iv classification code is marked on each packing bag. 4. The dominant wavelength, d is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. 5. The Iv guarantee should be added 15tolerance.
Part No. : LTL2R3SEKS2-132A BNS-OD-C131/A4
Page :
3
of
6
LITE-ON TECHNOLOGY CORPORATION
Property of LITE-ON Only
Typical Electrical / Optical Characteristics Curves
(25 Ambient Temperature Unless Otherwise Noted)
Part No. : LTL2R3SEKS2-132A BNS-OD-C131/A4
Page :
4
of
6
LITE-ON TECHNOLOGY CORPORATION
Property of LITE-ON Only
Features
* Compatible with radial lead automatic insertion equipment. * Most radial lead plastic lead lamps available packaged in tape and folding. * 2.54mm (0.1") straight lead spacing available. * Folding packaging simplifies handling and testing.
Package Dimensions
Item
Tape Feed Hole Diameter Component Lead Pitch Front to Rear Deflection Feed Hole to Bottom of Component Feed Hole to Overall Component Height Lead Length After Component Height Feed Hole Pitch Lead Location Center of Component Location Total Tape Thickness Feed Hole Location Adhesive Tape Width Adhesive Tape Position Tape Width Part No. : LTL2R3SEKS2-132A BNS-OD-C131/A4
Symbol D F H H1 H2 L P P1 P2 T W0 W1 W2 W3
Specification Minimum Maximum mm inch mm inch 3.8 0.149 4.2 0.165 2.3 0.091 3.0 0.118 --2.0 0.078 20.0 0.787 21.0 0.827 28.4 1.118 30.0 1.181 W0 11.0 0.433 12.4 0.488 13.0 0.511 4.4 0.173 5.8 0.228 5.05 0.198 7.65 0.301 --0.90 0.035 8.5 0.334 9.75 0.384 14.5 0.571 15.5 0.610 0 0 3.0 0.118 17.5 0.689 19.0 0.748 Page : 5 of 6
LITE-ON TECHNOLOGY CORPORATION
Property of LITE-ON Only
Packing Spec
2000 pcs per inner carton
10 Inner cartons per outer carton total 20000 pcs per outer carton
Part No. : LTL2R3SEKS2-132A BNS-OD-C131/A4
Page :
6
of
6

▲Up To Search▲

Price & Availability of LTL2R3SEKS2-132A

	To Download LTL2R3SEKS2-132A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .